[rev_slider alias=”Ultracraft”][/rev_slider]

UltraCraft is an American company with its manufacturing facility located in Liberty, North Carolina in the heart of the country’s furniture manufacturing industry. UltraCraft warrant to the original purchaser that their products will be free from manufacturer defects with a  100 years warranty. UltraCraft is environmental-friendly; certified to the KCMA Environmental Stewardship Program and complies with strict CARB standards.

UltraCraft offers a large selection of designs; traditional, contemporary, and everything in between. Choose from Wood, Deluxe Veneers, UltraLux, Thermofoils, Eurotek Veneer, Stainless Steel, Aluminum and more.

UltraCraft offer FULL ACCESS construction with true, full- overlay styling and with some of the tightest tolerances in the industry. UltraCraft also includes 5/8″-thick back panels for easier installation.

Face frame take up space. UltraCraft cabinet interior is larger, has fully adjustable, full depth shelves, and provides up to 15% more interior storage space.

UltraCraft offers Premium Finishes; stains, paints, glazes and special combinations: Aged, Rubbed, Worn, Vintage, Heritage, Linen and Sangria at some of the lowest prices around.

Custom Modifications means more storage, fewer fillers and more balanced kitchen design. In most cases UltraCraft will modify a cabinet, for no charge, up to the next standard- size cabinet.

Cabinet Materials:

Particleboard-5/8″-thick, furniture-grade, medium-density, particleboard laminated on both sides with thermoset melamine. Particle-board is certified as Environmentally Preferred Panels (EPP) by the composite wood council.
Plywood- 5/8″- thick, furniture-grade,  plywood laminated on both sides with thermoset melamine. Available at an up charge.
All cabinet connections (except backs)are wooden dowels and glue. Backs are rabbet and groove, glue and pin-nailed. Shelves are edgebanded on the front, full depth and adjustable, with steel shelf pegs unless other wise noted. Shelves are 3/4″ thick.
Vertical stretchers are doweled to the front and back of the bottom of Base and Vanity cabinets.
The front stretcher is set back 1mm from the toe kick notch and 1/4 off the floor. The back stretcher is set back 18mm (3/4″) from the back cabinet edge and 1/4″ of the floor.
Horizontal stretchers are doweled to the front and back of Base and Vanity cabinets. The front stretcher is set flush with the face and top edge of the panels. The back stretcher is set flush with the top of the end panels and captures the back. On Sink Bases, the front stretcher is placed vertically to allow for a sink installations.

Cabinets 42″ and wider (except cabinets with doors prepared for glass and sink base cabinets) and all 24″ deep cabinets 39″ and wider have a center support stile. Center support stiles are 1″ x 1  1/4″ (1 1/4″ x 2 1/2″ in blind base cabinets). Cabinets with wood door styles have center stiles in coordination wood veneer. Cabinets with Melamine, Thermofoil, Metal, Delux Veneers and Ultralux door styles have center styles in white, grey or neutral woodgrain melamine.

True frameless method of construction: full-overlay doors, fully-concealed hinges, no face frame, and vertical borings at 32mm increments. Reveals all doors and drawers is 3/32″ (2mm).


Standard hinges are soft close, fully-concealed, clip-on,steel, soft-closing, spring-loaded and can be individually adjusted six ways (at least 2mm each direction) to ensure accurate door alignment.

Drawers & Pull-Outs

Drawers are available in Wood Dovetail or Metal Drawer systems. Whichever system is selected must be used on the entire cabinet order; mixing drawer systems is not allowed. Drawer glide systems carry a lifetime manufacture’s warranty.

Wood Dovetail Drawer with Soft Close

On cabinets with all door styles except UltraLux, which comes standard with Metal Drawer with Soft Close. The Wood Dovetail drawer box has 5/8″ thick, solid wood on all four sides, dovetail joinery at each corner and a 1/4″ thick, fully-captured bottom, all in a Natural finish. Soft Close glides allow smooth and silent closing. Glides are a full-extension, tandem, undermount system with 100-pound dynamic-load rating. Soft Close glides are available on cabinets 12″,15″ 18″, 21″ and 24″ deep.

Metal Drawer Systems

Metal Drawer with Soft Close is standard on cabinets with Ultralux door styles. It is an upgrade for cabinets with all other door styles.

Doors and Drawer Fronts

Door styles are available in Melamine, Thermofoil, Wood, Stainless steel, Aluminum, UltraLux in thousands of color and finish combinations.

Wood Species

Oak– Light tan to brown heartwood, creamy white to grey sapwood. Very hard, dense, and heavy wood. Moderately open grain takes finish well. Oak is more resistant to effects of the environment.

Alder-A moderately light and slightly soft hard wood with color varying from white and lifht tan to pale, pinkish brown.

Rustic Alder- All the beauty of Alder with natural tight knots, pitch pockets, and character marks.